Paint Store :: Shop by Brand :: Absolute Coatings :: ABSOLUTE COATINGS 89105 ABSCO POLYURETHANE WOOD FLOOR FINISH SATIN 450 VOC SIZE:5 GALLONS.

ABSOLUTE COATINGS 89105 ABSCO POLYURETHANE WOOD FLOOR FINISH SATIN 450 VOC SIZE:5 GALLONS.

ABSOLUTE COATINGS 89105 ABSCO POLYURETHANE WOOD FLOOR FINISH SATIN 450  VOC SIZE:5 GALLONS. 

Absco Polyurethane Wood Floor Finish 450-VOC
ABSCO Professional Polyurethanes offers the latest technology in environmentally compliant wood floor finishes. ABSCO’s high solid content will beautify and protect most commercial and residential wood floors, providing years of enjoyment. ABSCO can also offer superior protection to most other interior wood surfaces, such as handrails, trim, furniture and cabinets.

RECOMMENDED USES:
Absco Polyurethane Wood Floor Finish is recommended for most interior commercial and residential wood.

TYPICAL PROPERTIES
Color in Container :Gloss - Clear / Satin - Hazy/ Semi-Gloss – Hazy
Solids Content/weight: Gloss – 50% / Satin – 51% / Semi-Gloss – 51%
Chemical Resistance: Excellent
VOC: VOC does not exceed 450 grams/liter
Flash Point: 105°F
Sheen Gloss: No less than 90 units on wood.
Satin: 25-35 units on wood.
Semi-Gloss: 50-60 units on wood.
Freeze/Thaw Stability: Stable
Shelf Life: Unlimited in unopened container.
Drying Time: 12 hrs. under good condition.
Cleanup: Mineral Spirits, Paint Thinner, Turpenine.
Application method: Lambswool applicator, natural bristle brush or E-Z Way Applicator.
Coverage Approx: 500-600 sq feet per gallon on raw wood.

Proper surface preparation is essential to achieve a high quality finish. Read the MSDS sheet and wear proper protection, which may include gloves, eye protection, and/or other protective devices.

Surface Preparation:
New or Newly Sanded Floors or Wood Surfaces: Prepare the floor according to NWFA or NOFMA accepted standard. The final pass before application of Absco Polyurethane Wood Floor Finish and sealer should be a #150 grit screen pad or sandpaper. Remove dust completely by sweeping, vacuuming and wiping the floor or work surface with a lint free cloth lightly dampened with mineral spirits. Avoid using fillers that contain stearates or wax. The floor or work surface and room temperature should be at least 65°F.

Previously Finished Floors or Wood Surfaces: Remove old finish in poor condition. Screen the work surface with a #150 screen disc, #180 grit sand paper, maroon pad or similar. Remove dust completely by sweeping, vacuuming and wiping the floor or work surface with a lint free cloth lightly dampened with mineral spirits. Avoid using fillers that contain stearates or wax.The floor or work surface and room temperature should be at least 65°F.

REMEMBER TO STIR THIS PRODUCT BEFORE AND DURING USE. SATIN AND SEMI-GLOSS CAN BE SHAKEN. AFTER SHAKING, LET IT SIT FOR 10 MINUTES.

Application:
Apply the finish with the grain of the wood. Apply in well ventilated area by brush, roller, spray, EZ way, lambswool applicator at room temperature and not in direct sunlight. When using a roller, work slowly to avoid air bubbles. Screen the floor or work surface in between coats with any of the following #150 screen disc, #180 grit sand paper, maroon pad or similar in between coats. Remember to vacuum and tack thoroughly after screening to remove all dust. Allow minimum of four to eight hours between coats, or until thoroughly dry. Heavy finish application, high humidity or lack of airflow will extend drying times. If waiting longer than 24 hours between coats, sanding is recommended.

Application over stain:Absco Polyurethane Wood Floor Finish should adhere well to most stain. A test for adhesion over brands other than Last•n•Last stain is recommended. Use Last•n•Last Classic Wood Stain following instruction on label. Allow the stain to dry a minimum of 24 hours under good conditions. Make sure the stain is completely dry before applying the Finish. Drying time: When applied according to directions, and in thin coats, Absco Polyurethane Wood Floor Finish should be dry to the touch in 4-6 hrs. Allow minimum of 12 hours between coats. Heavy finish application, high humidity or lack of airflow will extend drying times. Absco Polyurethane Wood Finish completely cures within 2 weeks.

Clean up:
Use paint thinner, mineral spirits or turpentine to clean brushes and applicators.

Maintenance:
Absco Polyurethane Wood Floor Finish never needs waxing. We recommend Polycare Floor Cleaner as the safe and effective cleaning product for all polyurethane coated surfaces. It has a unique soap-free, no rinse formula which will not harm polyurethane or varnished wood surfaces.

 
   

  48%

Details
 
SKU 5149189105
Quantity in stock 1000 item(s) available
Weight 57.00 lbs
Retail Price: $223.63
Our Price: $117.40

Options
 
Quantity

Add to cart
        


 

Send to friend

Your name: *
Your e-mail: *
Recipient's email: *

Type the characters you see in the picture. (If you do not see any picture here, please enable images in your web browser options and refresh this page):

Get a different code
The code is case-sensitive and must be entered exactly as above.

Send to friend
 

Detailed images

ABSOLUTE COATINGS 89105 ABSCO POLYURETHANE WOOD FLOOR FINISH SATIN 450  VOC SIZE:5 GALLONS.
 

Recommended products list

Customers who bought this product also bought the following products:  
 

Popular Categories

Tapes

Spray Paint

Paint Brushes

Paint Tools

Caulk and Sealants

Paint Remover & Stripper

Hand Tools

Interior Paint

Exterior Paint

 

Popular Brands

ZAR

Valpar

Cabot

DAP

3M

ASM

 

Hammerite

Modern Masters

 

Best Seller Products

Duct Tape

Black Paint

White Paint

Blue Paint

Red Paint

Dap Plus

Chalk Board Paint

Gold Paint

Aluminum Paint

 
 

We accept major credit cards

credit cards logo
 
Home | Store | About Us | Search | Terms & Conditions | Privacy Statement | Contact Us | Directory | Site Map | News | Paint Store Blog
 
SEO by site SEO
 
 

CONNECT WITH US
Copyright 2005-2015 Paint Store - All Rights Reserved