Search: Advanced search
 
Printable version 
Categories Categories
Shop by Brand
Paints & Stains
Painting Tools
Paint Remover & Strippers
Solvents/Cleaners
Patching Materials
Tapes & Adhesives
Paint Sprayers & Accessorios


Bestsellers Bestsellers
1. ABSOLUTE COATINGS 70020 POLYCARE FLOOR CLEANER CONCENTRATE SIZE:20 OZ.
2. ABSOLUTE COATINGS 13104 LAST N LAST ULTRA CLEAR WATERBORNE WOOD FINISH SATIN SIZE:QUART.
3. ABSOLUTE COATINGS 13101 LAST N LAST ULTRA CLEAR WATERBORNE WOOD FINISH SATIN SIZE:1 GALLON.
4. ABSOLUTE COATINGS 89105 ABSCO POLYURETHANE WOOD FLOOR FINISH SATIN 450 VOC SIZE:5 GALLONS.
5. ABSOLUTE COATINGS 50104 LAST N LAST POLYURETHANE WOOD FINISH SATIN SIZE:QUART.


Manufacturers Manufacturers
3M
Absolute Coatings
Advance Protective Products
Akzo Nobel Paints LLC
Allway Tools
American Safety Razor
ASM
Cabot Stain
Convenience Products
Daich Coatings

Other manufacturers...


Special Special
Gift certificates


Help Help
Contact us
Privacy statement
Terms & Conditions
Sitemap
About Us
Tips for Painting

Paint Store :: Shop by Brand :: Absolute Coatings :: ABSOLUTE COATINGS 54901 LAST N LAST RESIDENTAL WATERBORNE WOOD FLOOR FINISH SATIN WITH 2-PART CATALYST 275 VOC SIZE:1 GALLON.

ABSOLUTE COATINGS 54901 LAST N LAST RESIDENTAL WATERBORNE WOOD FLOOR FINISH SATIN WITH 2-PART CATALYST 275 VOC SIZE:1 GALLON.
ABSOLUTE COATINGS 54901 LAST N LAST RESIDENTAL WATERBORNE WOOD FLOOR FINISH SATIN WITH 2-PART CATALYST 275 VOC SIZE:1 GALLON. 

LNL-500X Residential Grade Waterborne Wood Floor Finish
LNL-500X incorporates the latest waterborne technology with Microban antimicrobial protection and a 5 Year Residential Wear Warranty, for advanced protection of wood floors. Our unique technology combines the benefits of professional waterborne floor finishes, with the benefits of Microban antimicrobial protection. Microban protection continuously inhibits the growth of bacteria, mold and mildew that can cause stains, odors, and damage the finish on your floor. And because Microban protection is built into this coating, it will not wash off or wear away for the life of the finish. No Thinning Required.

RECOMMENDED USES:
LNL-500X is recommended for interior residential application.

TYPICAL PROPERTIES
Color in Container: Milky white (dries clear)
Solids Content: 30+/-1%
Chemical Resistance: Excellent
VOC: VOC does not exceed 275 grams/liter
Flash Point: 198°F
Sheen Gloss: >80 units @ 60° on wood
Semi-Gloss: 50-60 units @ 60° on wood
Satin: 25-30 units @ 60° on wood
Freeze/Thaw Stability: Stable (if frozen, thaw completely before using)
Pot Life: Unlimited in unopened container
Dry Time: 2 to 3 hours with good conditions
Clean Up: Water
Application method: T-Bar applicator, Synthetic waterborne applicator and nylon brush.
Coverage: 500-550 sq. feet per gallon.

Proper surface preparation is essential to achieve a high quality finish. Read the MSDS sheet and wear proper protection, which may include gloves, eye protection, and/or other protective devices.

Surface Preparation:
New or Newly Sanded Floors or Wood Surfaces:Prepare the floor according to NWFA or NOFMA accepted standard. Make a final cut with 80-100 grit sandpaper and screen with 120-150 grit screen. Apply LNL-100S or LNL-100SA followed by 2 or 3 coats of LNL-500X. Remove dust completely by sweeping, vacuuming and wiping the floor or work surface with a lint free cloth lightly dampened with water. The floor or work surface and room temperature should be at least 65°F.
Previously finished Floors or Wood Surfaces:Remove old finish in poor condition. If the old finish is shellac or contains wax or any stearate, regardless of the condition, remove it completely then follow surface preparation for New Wood Surfaces. If old finish is still sound and good, screen the work surface with a #150 screen disc, #180 grit sand paper, maroon pad or similar. Remove dust completely by sweeping, vacuuming and wiping the work surface with a lint free cloth lightly dampened with water. The work surface and room temperature should be at least 65°F. Two to three coats work best on previously finished surfaces.

REMEMBER TO STIR THIS PRODUCT BEFORE AND DURING USE. LET IT STAND FOR 10 MINUTES AFTER STIRRING.

Application:
Apply in well ventilated area by nylon brush, or synthetic waterborne applicator at room temperature and not in direct sunlight. Last•n•Last 500X looks milky when applied, but will dry to a clear, beautiful finish. Pou a 6-8” wide line of the finish along the starting wall. Apply the finish with the grain of the wood. Using a clean pre-dampened waterborne applicator, pull forward with the grain of the wood, moving the finish towards the opposite wall. Holding the applicator at a snowplow angle will maintain a wet edge at all times.( Maintain at least 3” wide wet edge to ensure proper coverage). At the end of each run, turn the applicator towards you and pad out the applicator parallel to the wet edge. Feather out turns. If pushed too hard or fast, drips will fly off the applicator. Missed areas can be touched up if seen right away.To prevent lapping and dry marks, be sure you are using the recommendd overage. Do no spread too thin. Screen the work surface in between coats with any of the following #150 screen disc, #180 grit sand paper, maroon pad or similar. Remember to vacuum and tack thoroughly after screening to remove all dust. Allow minimum of two hours between coats, or until thoroughly dry. Heavy finish application, high humidity or lack of airflow will extend drying times. If waiting longer than 24 hours between coats, sanding is recommended.

Application over stain:
Last•n•Last 500X should adhere well to most stain, but a test for adhesion over brands other than Last•n•Last stain is recommended. Use Last•n•Last Classic Wood Stain following instruction on label. Allow the stain to dry a minimum of 24 hours under good conditions. Make sure the stain is completely dry before applying the finish or sealer.

Drying Time:
When applied according to directions, and in thin coats, Last•n•Last 500X should be dry to the touch in 1 hour. Allow a minimum of 2 hours between coats. Heavy finish application, high humidity or lack of airflow will extend drying times.The floor can be walked on after 24 hrs. Last•n•Last 500X cures in approximately 2 weeks. Please allow the finish to be fully cured for area rugs or mats to be put down. The floor is susceptible to scuffing and marring before full cure.

Maintenance:
Last•n•Last 500X never needs waxing. We recommend Polycare Floor Cleaner as the safe and effective cleaning product for all polyurethane coated surfaces. It has a unique soap-free, no rinse formula which will not harm polyurethane or varnished wood surfaces.

 
   

  47%

Details
 
SKU 5149154901
Quantity in stock 1000 item(s) available
Weight 11.00 lbs
Retail Price: $128.78
Our Price: $67.61

Options
 
Quantity

Add to cart
        


 

Send to friend
Your name: *
Your e-mail: *
Recipient's email: *

Type the characters you see in the picture. (If you do not see any picture here, please enable images in your web browser options and refresh this page):

Get a different code
The code is case-sensitive and must be entered exactly as above.

Send to friend
 

Detailed images
ABSOLUTE COATINGS 54901 LAST N LAST RESIDENTAL WATERBORNE WOOD FLOOR FINISH SATIN WITH 2-PART CATALYST 275 VOC SIZE:1 GALLON.
 

Recommended products list
Customers who bought this product also bought the following products:  

 
 

Your cart Your cart
Cart is empty
 

View cart
Checkout
Orders history


Authentication Authentication
Username

Password

Log in 
Register 
Recover password

If Javascript is disabled in your browser click here


News News


 


Popular Categories

Tapes

Spray Paint

Paint Brushes

Paint Tools

Caulk and Sealants

Paint Remover & Stripper

Hand Tools

Interior Paint

Exterior Paint

 

Popular Brands

ZAR

Valpar

Cabot

DAP

3M

ASM

 

Hammerite

Modern Masters

 

Best Seller Products

Duct Tape

Black Paint

White Paint

Blue Paint

Red Paint

Dap Plus

Chalk Board Paint

Gold Paint

Aluminum Paint

 
 

We accept major credit cards

credit cards logo
 
Home | Store | About Us | Search | Terms & Conditions | Privacy Statement | Contact Us | Directory | Site Map | News | Paint Store Blog
 
SEO by site SEO
 
 

CONNECT WITH US
Copyright 2005-2015 Paint Store - All Rights Reserved