Recommended 
          Uses:
          Cabot Semi-Transparent Acrylic Stains combine the penetrating properties 
          of traditional oil-based stains with the easy soapand- water clean-up 
          of water-based finishes. These stains are specially formulated to provide 
          long-lasting, vapor-permeable protection that beautifies and enriches 
          exterior wood surfaces. Containing a special acrylic resin, these products 
          are ideal for all types of natural wood siding, shingles, roofs and 
          log homes. Superior ultra-violet protection is achieved through the 
          use of non-fade, earth-tone pigments, in addition to a superior 100% 
          acrylic resin. Semi-Transparent Acrylic Stains are formulated to weather 
          slowly over time –without cracking, peeling or blistering. Cabot 
          Semi-Transparent Acrylic Stains are formulated for application on new 
          or properly reconditioned wood, including siding, shingles, shakes, 
          fences, roofs and on log homes. These beautiful stains provide outstanding 
          results on all natural wood species such as cedar, redwood, fir, pine, 
          spruce and cypress, including pressure-treated wood and plywood panel 
          siding. These stains may also be applied to new, unprimed fiber cement 
          siding.
        Composition:
          Deep-penetrating, richly pigmented stains based on 100% acrylic resin.
        Finish:
          Dries to a natural, semi-transparent flat finish.
        Coverage:
          On smooth surfaces, approximately 200-300 square feet per gallon (4.9-7.4
          square meters/liter); on rough surfaces, 100-200 square feet per gallon 
          (2.5-4.9 square meters/liter). These rates will vary depending upon 
          the porosity of the surface.
        Restrictions:
          DO NOT INTERMIX WITH CABOT OIL-BASED PRODUCTS. Do not apply in direct 
          sunlight, to hot surfaces, or when air or surface temperature is below 
          50°F. Do not apply over wet or damp surfaces or when rain is imminent. 
          Do not thin or combine with any other products. Do not use steel wool 
          on wood that is to be coated with these products. Do not apply over 
          previously painted or sealed surfaces. Cure new stucco and masonry products 
          for a minimum of 30 days before applying Semi-Transparent Acrylic Stains. 
          This product is not recommended for decks or interior surfaces. For 
          exterior use only. Protect stored containers from freezing.