Clear
Polyurethane Wood Finish- 350 VOC
Last·n·Last
Clear Polyurethane Wood Finish combines the beauty and durability of
100% pure polyurethane with Microban antimicrobial protection. The Professional’s
Choice for over 40 years, Last n Last is the premium quality wood finish.
Manufactured from the highest quality resins, Last n Last will provide
years of outstanding beauty and durability on most wood surfaces. Adhesion
is excellent – resists flaking and chipping. For interior use
only, not recommended for coating over white surfaces. Last n Last is
designed to be used on all types of wood, including floors, stairs,
moldings, furniture, and crafts. Microban protection is built into this
coating, it will not wash off or wear away for the life of the finish.
RECOMMENDED USES:
Last·n·Last Clear Polyurethane Wood finish is recommended
for most interior commercial and residential wood.
TYPICAL
PROPERTIES
Color in Container: Gloss - Clear; Satin – Hazy; Semi-Gloss –
Hazy
Solids Content/weight Gloss – 57-60%; Satin – 53%-57%; Semi-Gloss
– 53%-57%
Chemical Resistance: Excellent
VOC: VOC does not exceed 350 grams/liter
Flash Point: 105°F
Sheen Gloss: No less than 90 units on wood.
Satin: 25-35 units on wood.
Semi-Gloss: 50-60 units on wood.
Freeze/Thaw Stability:Stable
Shelf Life: Unlimited in unopened container.
Drying Time: 6-8 hours between coats under good condition
Cleanup: Mineral Spirits, Paint Thinner, Turpentine.
Application method: Lambswool applicator, natural bristle brush
Coverage Approx: 500-600 sq feet per gallon on raw wood.
Proper
surface preparation is essential to achieve a high quality finish. Read
the MSDS sheet and wear proper protection, which may include gloves,
eye protection, and/or other protective devices.
Surface Preparation:
New
or Newly Sanded Floors or Wood Surfaces: Make several passes with the
sandpaper, increasing the paper fineness with each pass. The final pass
before application on Last•n•Last Clear Polyurethane Wood
Finish should be with a #100 to #150 grit screen pad or sandpaper. Remove
dust completely by sweeping, vacuuming and wiping the floor or work
surface with a lint free cloth lightly dampened with mineral spirits.
The floor or work surface and room temperature should be at least 65°F.
Previously Finished Floors or Wood Surfaces:Remove old finish in poor
condition. Screen the work surface with a #100 to #150 screen disc,
#180 grit sand paper, maroon pad or similar. Remove dust completely
by sweeping, vacuuming and wiping the floor or work surface with a lint
free cloth lightly dampened with mineral spirits. The floor or work
surface and room temperature should be at least 65°F.
REMEMBER
TO STIR THIS PRODUCT BEFORE AND DURING USE. SATIN AND SEMI-GLOSS CAN
BE SHAKEN. AFTER SHAKING, LET IT SIT FOR 10 MINUTES.
Application:
Apply the finish with the grain of the wood. Apply in well
ventilated area by brush, roller, spray, or lambswool applicator at
room temperature and not in direct sunlight. When using a roller, work
slowly to avoid air bubbles. Screen the floor or work surface in between
coats with any of the following #150 screen disc, #180 grit sand paper,
maroon pad or similar in between coats. Remember to vacuum and tack
thoroughly after screening to remove all dust. Allow minimum of six
to eight hours between coats, or until thoroughly dry. Heavy finish
application, high humidity or lack of airflow will extend drying times.
If waiting longer than 24 hours between coats, sanding is recommended.
Application over stain:
Last•n•Last Clear Polyurethane Wood Finish should
adhere well to most stain, but a test for adhesion over brands other
than Last•n•Last stain is recommended. Use Last•n•Last
Classic Wood Stain following instruction on label. Allow to dry a minimum
of 24 hours under good conditions. Make sure the stain is completely
dry before applying the Finish.
Drying
Time:
When applied according to directions, and in thin coats, Last•n•Last
Clear Polyurethane Wood Finish should be dry to the touch in 3 hours.
Allow minimum of 6 hours between coats. Heavy finish application, high
humidity or lack of airflow will extend drying times. Last·n·Last
Clear Polyurethane Wood Finish completely cures within 2 weeks.
Clean
up:
Use paint thinner, mineral spirits or turpentine to clean brushes
and applicators.
Maintenance:
Last•n•Last Clear Polyurethane Wood Finish never
needs waxing. We recommend Polycare Floor Cleaner as the safe and effective
cleaning product for all polyurethane coated surfaces. It has a unique
soap-free, no rinse formula which will not harm polyurethane or varnished
wood surfaces.