Minwax®
Lacquer Sanding Sealer is formulated to work as a base coat under Minwax®
Clear Brushing Lacquer. It is easy to sand, dries quickly, and seals
the wood in just one coat. After sanding, it provides a smooth, even
surface that is ready to be top coated with Minwax® Clear Brushing
Lacquer.
Directions
1.Surface
must be dry and free of old finishes in poor condition, paint, wax,
grease, polish, dirt or other foreign matter. Note: Do not apply lacquer
over polyurethane finishes.
2.Sand the wood to obtain a smooth, uniform surface. Remove all dust
with a cloth dampened with mineral spirits.
3.Stir Minwax® Lacquer Sanding Sealer well before and during use
to rotate the product from the bottom to the top of the can. NEVER SHAKE.
4.Apply a coat of sanding sealer using a high quality natural bristle
brush. On unfinished wood, apply sufficient sanding sealer to seal open
joints, edges and end grain.
5.Let dry at least one hour, then sand with 220 grit sandpaper in the
direction of the wood's grain. Remove all sanding dust. Note: You can
choose to stain with Minwax® Wood Finish™ stain prior to applying
sanding sealer. If you do stain, be careful not to sand through to the
stain.
6.Apply at least three coats of Minwax® Clear Brushing Lacquer according
to its label directions. Do not apply polyurethane or other varnishes
over Minwax® Lacquer Sanding Sealer.
CLEAN-UP:
For easy clean-up use lacquer thinner.
COVERAGE:
Approximately 125 sq. ft. per quart.