Paint Store :: Shop by Brand :: Minwax :: MINWAX 60960 LOW GLOSS HARDWOOD FLOOR REVIVER SIZE:QUART.

MINWAX 60960 LOW GLOSS HARDWOOD FLOOR REVIVER SIZE:QUART.

MINWAX 60960 LOW GLOSS HARDWOOD FLOOR REVIVER SIZE:QUART. 

Minwax® Hardwood Floor Reviver refreshes hardwood floors that are worn, scratched, or dull. It is available in both High-Gloss and Low-Gloss sheens. Applying Reviver requires no sanding or special preparation, just squirt onto floor, spread with application tool and let dry. Provides beauty and protection for 3-6 months.

Directions

PREPARE THE FLOOR:

•Sweep or vacuum the floor to remove all loose dirt
•Wash the floor with a mild oil-free cleaner such as Minwax® Hardwood Floor Cleaner
•Allow to dry completely
•Test Minwax® Hardwood Floor Reviver on a small inconspicuous area of the floor such as inside a closet to ensure adhesion and compatibility. Wax and other ingredients in some floor polishes may cause Reviver to bead up or prevent it from adhering to the floor.
Note: Minwax® Hardwood Floor Reviver is not recommended for use over unfinished, newly finished, waxed or oiled floors. To test for wax, apply a few drops of water to the floor. Wait 10 minutes. If the wetted area turns white, the floor may have a wax coating. Reviver is not designed for use on floors that are in very poor condition. Badly damaged floors or floors that have large areas where the finish is worn away will require a complete refinishing.

APPLY THE COATING:

•Rock the bottle several times before opening the cap. Do not shake.
•Squirt Minwax® Hardwood Floor Reviver lightly in an "S" pattern directly onto the floor in a 3 x 3 foot area using a damp painter's pad or synthetic applicator attached to a long handle, spread Reviver across the floor.
•Work in the direction of the grain using a back-and-forth motion. Keep working in small sections until the entire floor is coated. For best results, apply a thin, even coat. Keep airborne dust to a minimum while the floor is wet.

ALLOW THE COATING TO DRY:

•Let the finish dry at least two hours before walking lightly on the floor. Do not walk on the floor if the surface is wet or tacky. Avoid heavy traffic and do not replace furniture or rugs for 24 hours after application. When replacing furniture do not slide.
Hardwood Floor Reviver can be reapplied as needed (usually about every 6 months) to keep your floor looking beautiful.

CLEAN-UP: Application tools can be easily cleaned with soap and water.

 
   

  48%

Details
 
SKU 2742660960
Quantity in stock 1000 item(s) available
Weight 3.00 lbs
Retail Price: $32.35
Our Price: $16.98

Options
 
Quantity

Add to cart
        


 

Send to friend

Your name: *
Your e-mail: *
Recipient's email: *

Type the characters you see in the picture. (If you do not see any picture here, please enable images in your web browser options and refresh this page):

Get a different code
The code is case-sensitive and must be entered exactly as above.

Send to friend
 

Recommended products list

Customers who bought this product also bought the following products:  
 

Popular Categories

Tapes

Spray Paint

Paint Brushes

Paint Tools

Caulk and Sealants

Paint Remover & Stripper

Hand Tools

Interior Paint

Exterior Paint

 

Popular Brands

ZAR

Valpar

Cabot

DAP

3M

ASM

 

Hammerite

Modern Masters

 

Best Seller Products

Duct Tape

Black Paint

White Paint

Blue Paint

Red Paint

Dap Plus

Chalk Board Paint

Gold Paint

Aluminum Paint

 
 

We accept major credit cards

credit cards logo
 
Home | Store | About Us | Search | Terms & Conditions | Privacy Statement | Contact Us | Directory | Site Map | News | Paint Store Blog
 
SEO by site SEO
 
 

CONNECT WITH US
Copyright 2005-2015 Paint Store - All Rights Reserved