Paint Store :: Shop by Brand :: Minwax :: MINWAX 43000 GLOSS POLYURETHANE SIZE:PINT.

MINWAX 43000 GLOSS POLYURETHANE SIZE:PINT.

MINWAX 43000 GLOSS POLYURETHANE SIZE:PINT. 

Minwax® Fast-Drying Polyurethane is a clear, hard finish that dries fast to protect and beautify interior wood surfaces such as furniture, cabinets, moldings, and doors. Minwax® Fast-Drying Polyurethane Finish is among the most durable coatings for wood protection. Minwax® Fast-Drying Polyurethane's long-lasting protective finish makes it ideal for use on both finished and unfinished wood.

Directions

1.Surface must be dry and free of old finishes in poor condition, paint, wax, grease, polish, dirt or other foreign matter.
2.Sand to obtain a smooth uniform surface. Remove all dust with a cloth dampened with mineral spirits.
3.Stir Minwax® Fast-Drying Polyurethane before and during use to eliminate settling on the bottom of the can. Stir in such a manner as to rotate the product from the bottom to the top of the can. NEVER SHAKE.
4.Apply a THIN coat of Minwax® Fast-Drying Polyurethane using a high-quality natural or foam brush.
5.Let dry 4-6 hours. Then lightly sand entire surface with fine sandpaper (220 grit) to ensure an even finish and proper adhesion. Remove all dust.
6.Apply second coat. If third coat is desired, repeat step 5 before application.
7.After final coat, allow 24 hours before light use.
When used on wooden floors, use a lambs wool or synthetic pad applicator or natural bristle brush and maintain a wet edge to avoid lap marks. For maximum durability, we recommend three coats. Avoid heavy traffic and replacing of furniture for 72 hours after final coat. When replacing furniture, do not slide. Do not install rugs or clean floors for 7 days.

CLEAN-UP: For easy clean-up use mineral spirits or paint thinner.

COVERAGE: Approximately 125 square feet per quart.

Note: Above dry times are based on good ventilation, temperature of 77°F and 50% relative humidity. Lower temperature, higher humidity, lack of air movement or application of thick coats will extend drying times. Always test tackiness between coats. Do not sand or re-coat when surface is tacky. Slight ambering may be experienced when Polyurethane is applied over light-colored wood surfaces. Always spot test on an inconspicuous area to ensure satisfactory results. For light-colored wood surfaces, we recommend protecting with Minwax® Polycrylic® Protective Finish.

 
   

  48%

Details
 
SKU 2742643000
Quantity in stock 1000 item(s) available
Weight 2.00 lbs
Retail Price: $15.68
Our Price: $8.23

Options
 
Quantity


If you see this message, your web browser doesn't support JavaScript or JavaScript is disabled. Please enable JavaScript in your browser settings so the online store can function correctly.

 

Send to friend

Your name: *
Your e-mail: *
Recipient's email: *

Type the characters you see in the picture. (If you do not see any picture here, please enable images in your web browser options and refresh this page):

The code is case-sensitive and must be entered exactly as above.

Send to friend
 

Detailed images


 

Recommended products list

Customers who bought this product also bought the following products:  
 

Popular Categories

Tapes

Spray Paint

Paint Brushes

Paint Tools

Caulk and Sealants

Paint Remover & Stripper

Hand Tools

Interior Paint

Exterior Paint

 

Popular Brands

ZAR

Valpar

Cabot

DAP

3M

ASM

 

Hammerite

Modern Masters

 

Best Seller Products

Duct Tape

Black Paint

White Paint

Blue Paint

Red Paint

Dap Plus

Chalk Board Paint

Gold Paint

Aluminum Paint

 
 

We accept major credit cards

credit cards logo
 
Home | Store | About Us | Search | Terms & Conditions | Privacy Statement | Contact Us | Directory | Site Map | News | Paint Store Blog
 
SEO by site SEO
 
 

CONNECT WITH US
Copyright 2005-2015 Paint Store - All Rights Reserved