Search: Advanced search
 
Printable version 
Categories Categories
Shop by Brand
Paints & Stains
Painting Tools
Paint Remover & Strippers
Solvents/Cleaners
Patching Materials
Tapes & Adhesives
Paint Sprayers & Accessorios


Bestsellers Bestsellers
1. XIM 11015 400C CLEAR FLASH BOND PRIMER SEALER BONDER SIZE:SPRAY.
2. XIM 10730 #11461 PEEL BOND CLEAR ACRYLIC BONDING PRIMER SIZE:1 GALLON.
3. XIM 11012 400C CLEAR FLASH BOND PRIMER SEALER BONDER SIZE:QUART.
4. XIM 11011 400C CLEAR FLASH BOND PRIMER SEALER BONDER SIZE:1 GALLON.
5. XIM 13212 #11071 LATEX X-TENDER SIZE:1 GALLON.


Manufacturers Manufacturers
3M
Absolute Coatings
Advance Protective Products
Akzo Nobel Paints LLC
Allway Tools
American Safety Razor
ASM
Cabot Stain
Convenience Products
Daich Coatings

Other manufacturers...


Special Special
Gift certificates


Help Help
Contact us
Privacy statement
Terms & Conditions
Sitemap
About Us
Tips for Painting

Paint Store :: Shop by Brand :: XIM :: XIM 10631 #11431 PLASTIC AND VINYL PRIMER HIGH SOLIDS SIZE:1 GALLON PACK:4 GALLONS.

XIM 10631 #11431 PLASTIC AND VINYL PRIMER HIGH SOLIDS SIZE:1 GALLON PACK:4 GALLONS.
XIM 10631 #11431 PLASTIC AND VINYL PRIMER HIGH SOLIDS SIZE:1 GALLON PACK:4 GALLONS. 

Plastic & Vinyl Bonding Primer White: Product Number 1143
Solvent Born, Bonding Primer Sealer, VOC: less than 450 g/l

• Properties of both a primer and an adhesive

• Makes paint stick to plastics including PVC, Lexan, ABS, polypropylene and TPO

• Quick drying

• Top coat with most all types of paint in hours

• Tintable to pastels with universal tint colors.

Description: XIM’s Plastic & Vinyl Bonding Primer is formulated to bond strongly to a wide range of plastic & vinyl materials used in home and building construction. When applied to a clean surface, it will allow painting. Generally, plastic & vinyl materials and molded parts could not be painted with long term confidence. When the XIM Plastic & Vinyl Bonding Primer is used, regular oil-base alkyd paints, waterbased latex paints, 2K urethanes and 2K epoxy paints can be used to paint materials made of many plastics.

Product Preparation: XIM’s Plastic & Vinyl Bonding Primer is ready to use directly from the container. No thinning or reduction is required. Mix well before application. It may require extra time on different shakers to fully mix in any settled materials. Note: Keep the containers tightly closed when not in use. Store at room temperature.

Clean-Up: Clean equipment with mineral spirits, xylene or lacquer thinner immediately after use. Do not allow the mixed finish to remain in the spray gun or application equipment. Spray Gun Usage: When applying with spray gun equipment, vapors can build up rapidly and may cause flash fire. With all applications: vapors may travel to areas away from the work site and ignite; use only where moving air will carry vapors outside. Ground all equipment. Do not use where static electricity can build up and cause sparks.

Clean-Up: Clean equipment with XIM GON Cleaner, xylene, or lacquer thinner immediately after use.

Surface Preparation: Careful surface preparation and cleaning is the key to a good result. Be sure the surface is thoroughly clean and dry, free from all grease, wax, oil, polish, loose paint and dirt. Clean with a strong abrasive detergent, rinse well and allow to dry. Rough surfaces should be sanded smooth. Moldy or mildewed surfaces should be scrubbed with a mixture of one quart of household bleach and three quarts of water and then thoroughly rinsed with clean water. (Never mix bleach with detergents - particularly detergents containing ammonia.) Solvent wiping also recommended. Wipe down the surface with XIM GON Cleaner or Xylene. Do not use mineral spirits, turpentine solvents that will leave oily residues. Note: Some plastics are attacked by solvents - always check a small area before proceeding.

How to Apply: Use brush, roll or spray. The temperature of the surface and the surrounding air should be between 50 deg. F and 100 deg. F. They dry to touch in about 20-30 minutes under standard conditions (77 deg. F and 50% relative humidity). Thicker coats will take longer to dry. When using brush or roller, avoid excessive brushing or rolling because the Bonder can tack the applicator to the recently applied Bonder. Work in small areas and apply evenly. If an area is missed, wait a few minutes until the bonder has dried before touching up. To slow down the drying rate, small amounts of XIM’s XS Retarder or mineral spirits can be added. It can be top-coated within 1 hour. See the table below for top coat recommendations. Full cure is achieved in about 48 hours. For conventional spray use Binks 62 gun, 66 fluid nozzle, 63 PB air nozzle, or equivalent, at 40 to 60 psi atomization pressure. For airless spray application use .015 to .019 orifice, 60 mesh strainer and 2000 psi fluid pressure. For HVLP an internal pressure of 8 to 10 psi can be used. It is best to apply the Bonding Primer in several light to medium coats rather than one heavy coat. XIM Plastic & Vinyl Bonding Primer will generally harden in 24 hours. If faster cure and hardening is desired they can be force dried. NOTE: Recycled plastics, as well as plastic additives such as mold release agents, flow additives, flame retardants, etc. can affect primer adhesion. Because there are many types of plastics and composite materials always test a sample for acceptable adhesion before starting the job.

Plastics Application Chart

Plastic Materials
Recommended
Common
Name
Examples of Trade Names
Acrylonitrile Butadine Stryene ABS Various
Methyl Methylacrylate Acrylic Plexiglas®, Acrylite®, Lucite®, Crylex®
Cellulose Acetate Buterate CAB Various
Fiberglass FPR Fiberglas®
Nylon ---------
Various
Phenylene Oxide --------- Noryl®

Polycarbonate
PC Hyzod®, Tuffax CM-2, Lexan® MR-4000, Zelux®, Coex®
Polyester --------- Mylar®, Haysite®, Homalite®
Polypropylene PP Plasticore®, Trovidur®
Polystryene PS Styrolux®, Rexolite®
Polyurethane PU Various
Polyvinyl Chloride PVC Sintra®, Trovicel®

Thermoplastic Olefin
TPO Always test TPO for acceptable adhesion - May be polyethylene or a blend
Not Recommended
Fluorocarbon/Fluoropolymer PFA, PTFE Teflon®, Kel-F, Halar®, Korton®
Polyvinylidine Fluoride PVDF Kynar®
Polyvinylfluroide PVF Tedlar®
Polyethylene PE Low or High Density Polyethylene
 
   

  47%

Details
 
SKU 2359610631
Quantity in stock 1000 item(s) available
Weight 71.00 lbs
Retail Price: $498.20
Our Price: $261.56

Options
 
Quantity

Add to cart
        


 

Send to friend
Your name: *
Your e-mail: *
Recipient's email: *

Type the characters you see in the picture. (If you do not see any picture here, please enable images in your web browser options and refresh this page):

Get a different code
The code is case-sensitive and must be entered exactly as above.

Send to friend
 

Detailed images
XIM 10631 #11431 PLASTIC AND VINYL PRIMER HIGH SOLIDS SIZE:1 GALLON.
 

Recommended products list
Customers who bought this product also bought the following products:  

 
 

Your cart Your cart
Cart is empty
 

View cart
Checkout
Orders history


Authentication Authentication
Username

Password

Log in 
Register 
Recover password

If Javascript is disabled in your browser click here


News News


 


Popular Categories

Tapes

Spray Paint

Paint Brushes

Paint Tools

Caulk and Sealants

Paint Remover & Stripper

Hand Tools

Interior Paint

Exterior Paint

 

Popular Brands

ZAR

Valpar

Cabot

DAP

3M

ASM

 

Hammerite

Modern Masters

 

Best Seller Products

Duct Tape

Black Paint

White Paint

Blue Paint

Red Paint

Dap Plus

Chalk Board Paint

Gold Paint

Aluminum Paint

 
 

We accept major credit cards

credit cards logo
 
Home | Store | About Us | Search | Terms & Conditions | Privacy Statement | Contact Us | Directory | Site Map | News | Paint Store Blog
 
SEO by site SEO
 
 

CONNECT WITH US
Copyright 2005-2015 Paint Store - All Rights Reserved