Search: Advanced search
 
Printable version 
Categories Categories
Shop by Brand
Paints & Stains
Painting Tools
Paint Remover & Strippers
Solvents/Cleaners
Patching Materials
Tapes & Adhesives
Paint Sprayers & Accessorios


Bestsellers Bestsellers
1. UGL 13812 ZAR 138 SPANISH OAK WOOD STAIN SIZE:QUART.
2. UGL 11006 ZAR 110 SALEM MAPLE WOOD STAIN SIZE:1/2 PINT.
3. UGL 11406 ZAR 114 PROVINCIAL WOOD STAIN SIZE:1/2 PINT.
4. UGL 30941 ZAR 309 NEUTRAL WOOD PATCH SIZE:3 OZ.
5. UGL 11106 ZAR 111 WALNUT WOOD STAIN SIZE:1/2 PINT.


Manufacturers Manufacturers
3M
Absolute Coatings
Advance Protective Products
Akzo Nobel Paints LLC
Allway Tools
American Safety Razor
ASM
Cabot Stain
Convenience Products
Daich Coatings

Other manufacturers...


Special Special
Gift certificates


Help Help
Contact us
Privacy statement
Terms & Conditions
Sitemap
About Us
Tips for Painting

Paint Store :: Shop by Brand :: ZAR :: UGL 12733 ZAR 127 GOLDEN OAK WOOD STAIN 250 VOC SIZE:1 GALLON.

UGL 12733 ZAR 127 GOLDEN OAK WOOD STAIN 250 VOC SIZE:1 GALLON.
UGL 12733 ZAR 127 GOLDEN OAK WOOD STAIN 250 VOC SIZE:1 GALLON. 

ZAR® Wood Stain
ZAR® Wood Stain wipes on like furniture polish to add rich, uniform color to wood. ZAR®'s controlled penetration brings out the natural beauty of a variety of wood surfaces without streaks or lap marks.
ZAR® Wood Stain is perfect for cabinets, paneling, antiques, wood trim and unfinished furniture. ZAR® can be applied over painted and previously varnished surfaces for a beautiful wood grain effect and ZAR® Wood Stain is recommended by leading manufacturers of fiberglass, steel and Masonite® doors.

  • Stains and seals with "Controlled Penetration"
  • Wipes on to produce a uniform color
  • Leaves no lap marks or streaks
  • Can be applied to metal or previously painted or varnished surfaces to achieve a wood grain effect
  • The ideal stain for fiberglass, steel or Masonite® doors
  • Coverage - up to 400 square feet per pint

DESCRIPTION
ZAR Wood Stain wipes on like furniture polish to add rich, uniform color to wood. Its controlled penetration assures uniform color tone without streaks or lap marks.

ZAR Wood Stain can be applied to all varieties of wood, both unfinished and previously finished, and can be used on surfaces that have been previously painted or varnished to achieve a wood grain effect. ZAR Wood Stain brings out the beauty of wood on interior surfaces such as cabinets, floors, paneling, antiques, doors, wood trim and unfinished furniture. ZAR Wood Stain is available in 19 wood tones plus Country White in halfpints, pints, quarts and gallons. Tint Base is available in quarts and gallons.

STEEL AND FIBERGLASS DOORS
In addition to wood doors, ZAR Wood Stain is excellent for making steel and fiberglass doors look like real wood.

FIBERGLASS DOORS
Because fiberglass doors have a wood grain embossed in their surface, ZAR Wood Stain can be used to quickly and easily bring to life the door’s real wood look.

SURFACE PREP NEW WOOD
Make sure the surface is clean and dry. Sand with #120 or #150 grit sandpaper until the surface feels smooth. Remove sanding dust with a tack rag or a cloth dampened with paint thinner.

APPLICATION
Stir ZAR Wood Stain thoroughly before and during application. Using a clean lint-free cloth, wipe ZAR Wood Stain on evenly in the direction of the grain of the wood. Wipe off excess wood stain using a clean lint-free cloth. Let the stain dry for 3 to 4 hours. If greater depth of color is desired, apply a second coat of ZAR Wood Stain and repeat drying and buffing steps. Allow 3 hours drying time. Protect your stain by top coating with ZAR Polyurethane

GRAINING OF PAINTED SURFACES
Remove all dirt, oil, wax, polish and grease with turpentine or suitable solvent. Sand to remove gloss and wipe away sanding dust with a tack rag. Wipe on ZAR Wood Stain with a lint-free cloth, and then use a brush, cloth or graining tool to achieve a wood grain effect. Allow ZAR Wood Stain to dry at least 48 hours before applying a protective coat of ZAR Polyurethane Clear Wood Finish. Note: Stains and clear finishes will not adhere to shellac or lacquer. They should be removed before refinishing.

COVERAGE
ZAR Wood Stain covers up to 400 square feet per pint depending on porosity of the wood.

DIRECTIONS
To apply, you can remove the door from its hinges by removing the hinge pins, or you can work with the door mounted. In either case, make sure the surface is clean and dry before beginning. It is helpful to wipe the surface lightly with a cloth dampened with denatured alcohol or paint thinner to remove dust particles. Stir ZAR Wood Stain thoroughly. Using a lint free cloth, wipe on a light, uniform coat of ZAR Wood Stain. Use a dry soft-bristled brush to remove any streaks and enhance the wood grained look of the door. If your first coat is too light, wait 48 hours and wipe on a second coat. As with the first coat, remove any streaks with a dry soft-bristled brush. Do not sand between coats. Sanding can damage the fiberglass surface. After allowing the stain to dry 48 hours, complete the job by applying ZAR Polyurethane Clear Wood finish. For the exterior side of doors exposed to prolonged or extreme sunlight, apply ZAR Exterior Polyurethane. For doors protected by overhangs and porches, and for the inside of doors, apply ZAR Interior Polyurethane. Use a quality, natural bristle brush or use ZAR Polyurethane spray cans. If using a brush, apply a thin coat of ZAR Polyurethane by flowing on the material in the direction of the grain. If using ZAR Polyurethane Spray, apply a thin even coat. Apply a second coat, if needed, after 12 hours. Allow 24 hours drying time before rehanging the door.

STEEL DOORS
Create a wood grain effect on steel doors with ZAR Wood Stain and the ZAR Wood Graining Tool. ZAR is the only wood stain widely available with enough pigment and body to be used as a graining medium.

DIRECTIONS
Before you begin to grain your door, practice on a painted metal or painted wood surface until you feel comfortable with the graining tool. When you begin to grain your door, wipe a thin, uniform coat of ZAR Wood Stain on the surface and let stand for about 15 minutes. Beginning at the top of the surface to be grained, draw the graining tool down, moving it at a constant speed. While drawing the graining tool, use a rocking motion to create a natural heartwood appearance. Do not allow the grooves of the graining tool to flood with stain. If you are not satisfied with your results, wipe off what you have applied using a cloth dampened with mineral spirits and start over. After allowing at least 48 hours drying time, apply a thin, uniform coat of ZAR Wood Stain over the newly grained surface in the direction of the grain. The darkness of the finish depends on the amount of stain applied. Allow this coat to dry thoroughly for at least 48 hours. Apply ZAR Polyurethane Clear Wood Finish. For the exterior side of doors exposed to prolonged or extreme sunlight, apply ZAR Exterior Polyurethane. For doors protected by overhangs and porches, and for the inside of doors, apply ZAR Interior Polyurethane. Allow the clear finish to dry for 24 hours before putting the door into service.

 
   

  48%

Details
 
SKU 7994112733
Quantity in stock 1000 item(s) available
Weight 13.00 lbs
Retail Price: $77.30
Our Price: $40.58

Options
 
Quantity

Add to cart
        


 

Send to friend
Your name: *
Your e-mail: *
Recipient's email: *

Type the characters you see in the picture. (If you do not see any picture here, please enable images in your web browser options and refresh this page):

Get a different code
The code is case-sensitive and must be entered exactly as above.

Send to friend
 

Detailed images
UGL 12733 ZAR 127 GOLDEN OAK WOOD STAIN 250 VOC SIZE:1 GALLON.
 

Recommended products list
Customers who bought this product also bought the following products:  

 
 

Your cart Your cart
Cart is empty
 

View cart
Checkout
Orders history


Authentication Authentication
Username

Password

Log in 
Register 
Recover password

If Javascript is disabled in your browser click here


News News


 


Popular Categories

Tapes

Spray Paint

Paint Brushes

Paint Tools

Caulk and Sealants

Paint Remover & Stripper

Hand Tools

Interior Paint

Exterior Paint

 

Popular Brands

ZAR

Valpar

Cabot

DAP

3M

ASM

 

Hammerite

Modern Masters

 

Best Seller Products

Duct Tape

Black Paint

White Paint

Blue Paint

Red Paint

Dap Plus

Chalk Board Paint

Gold Paint

Aluminum Paint

 
 

We accept major credit cards

credit cards logo
 
Home | Store | About Us | Search | Terms & Conditions | Privacy Statement | Contact Us | Directory | Site Map | News | Paint Store Blog
 
SEO by site SEO
 
 

CONNECT WITH US
Copyright 2005-2015 Paint Store - All Rights Reserved