Search: Advanced search
 
Printable version 
Categories Categories
Shop by Brand
Paints & Stains
Painting Tools
Paint Remover & Strippers
Solvents/Cleaners
Patching Materials
Tapes & Adhesives
Paint Sprayers & Accessorios


Bestsellers Bestsellers
1. UGL 01908 DRYLOK ETCH SIZE:12 OZ.
2. UGL 27513 DRYLOK WHITE LATEX BASE WATERPROOFER READY MIXED SIZE:1 GALLON.
3. UGL 30507 DRYLOK GRAY MASONRY CRACK FILLER CARTRIDGE SIZE:10.5 OZ. PACK:10 PCS.
4. UGL 22113 DRYLOK CLEAR MASONRY TREATMENT LATEX BASE SIZE:1 GALLON.
5. UGL 00924 DRYLOK FAST PLUG SIZE:10 LBS.


Manufacturers Manufacturers
3M
Absolute Coatings
Advance Protective Products
Akzo Nobel Paints LLC
Allway Tools
American Safety Razor
ASM
Cabot Stain
Convenience Products
Daich Coatings

Other manufacturers...


Special Special
Gift certificates


Help Help
Contact us
Privacy statement
Terms & Conditions
Sitemap
About Us
Tips for Painting

Paint Store :: Shop by Brand :: Drylok :: UGL 28213 DRYLOK SLATE GRAY EPOXY E1 FLOOR PAINT 221 VOC SIZE:1 GALLON.

UGL 28213 DRYLOK SLATE GRAY EPOXY E1 FLOOR PAINT 221 VOC SIZE:1 GALLON.
UGL 28213 DRYLOK SLATE GRAY EPOXY E1 FLOOR PAINT 221 VOC SIZE:1 GALLON. 

DRYLOK® E1 1-PART EPOXY FLOOR PAINT
A revolutionary 1-part epoxy floor paint that utilizes advanced epoxy technology for excellent durability. E1 is resistant to hot tire marks and pickup, chemicals, oil, grease and gasoline stains. Cleans up with water and is storable. E1 is a semi-gloss coating.

 

DESCRIPTION
DRYLOK 1-Part Epoxy Floor Paint utilizes an Advanced Epoxy Technology
for greater protection and durability.
Specially formulated to protect and beautify interior and exterior concrete floors, garage floors, basement floors, shop floors, carports, walkways, driveways and patios. Not recommended for floor previously painted with 2 component epoxy paints.

SURFACE PREP
The success of your project is dependent upon the degree of surface preparation provided. Surface must be clean and free from dirt, dust, grease, oil, soap, wax, concrete curing membranes and the oily film left by sweeping compounds. Stains on the surface should be removed using UGL DRYLOK Concrete Cleaner & Degreaser or a heavy duty detergent until the surface is clean. Rinse thoroughly with clean water and allow to dry completely. The concrete to be painted should have a slight texture, such as a broom finish or the look and feel of medium grit sandpaper. For smooth concrete, pressure wash the surface or acid etch as described below for new / unpainted surfaces.
Previously Painted Floors: To apply over glossy previously painted floors, the old coating must be sanded or dulled with a liquid sanding product like UGL’s D-Gloss Liquid Sander and Cleaner.
New/Unpainted surfaces: New concrete must cure for 30 to 60 days. For best results, pre-cast, poured or highly troweled concrete should be pressure washed using a 1100-1750 psi pressure washer to remove any surface glazing, form release compounds or other surface contaminants. Allow to dry completely. To avoid damaging the concrete surface do not use a pressure washer setting above 1750 psi. The concrete surface should look and feel like 120 grit medium grade sandpaper. Test the concrete by sprinkling a few drops of water on the surface. If water applied to the surface does not penetrate readily into the prepared concrete, acid etching may be required.
See below for acid etching recommendations.

Acid Etching: To properly etch concrete, use muriatic acid (approximately 15% Hydrochloric acid is recommended) according to manufacturer’s directions. Muriatic acid/Hydrochloric acid is a hazardous corrosive chemical and it is recommended that all safety precautions on the label be followed. The muriatic acid must be applied until the surface has the look and feel of 120 grit medium grade sandpaper. The acid etching process may be repeated until the desired texture is achieved. All residual acid must be rinsed from the surface and the concrete must be thoroughly dried prior to application of the DRYLOK 1-Part Epoxy Floor Paint. To test for residual acid it is recommended that the surface pH be tested by using pH test paper. The pH of the concrete should be 7 or greater. Another method to test the concrete for excess acid is by application of a baking soda solution (2 teaspoons of baking soda in 1 cup of warm water). If the baking soda solution bubbles and foams then the acid has not been thoroughly rinsed away. Continue rinsing until the baking soda no longer reacts. After thorough drying of the concrete it may be required to vacuum the surface to remove the white/powdery residue.

APPLICATION
Stir thoroughly before and during application. Air and surface temperature
must be above 50° F. Do not thin. Apply an even coat using a 3/8” nap roller or nylon polyester brush. Do not paint in direct sunlight or apply to a hot surface.
Provide good ventilation for normal drying. Allow first coat to dry 4 hours prior to applying second coat. 2 coats are required. The second coat should be applied in a cross direction to the first coat to achieve color uniformity. Do not apply more than 2 coats. When using 2 or more containers of the same color of DRYLOK 1-Part Epoxy Floor Paint, mix together to assure color uniformity.
Note: Painted surfaces may become slippery when wet.

IMPORTANT
Floors that are subjected to hydrostatic pressure (water seeping from underneath the floor) or are continually damp cannot be satisfactorily paint with any paint or coating. Moisture on basement floor caused by water seeping through masonry walls or through floor-wall joints or cracks must first be eliminated. Use DRYLOK Fast Plug, a quick setting hydraulic cement, to fill floor-wall joints or cracks, and DRYLOK Masonry Waterproofer to seal masonry walls.

CLEAN-UP
Clean application tools immediately after use with warm soapy water.

COVERAGE
Coverage 300 to 400 ft.2/Gallon/Coat.

 
   

  47%

Details
 
SKU 7994128123
Quantity in stock 1000 item(s) available
Weight 14.00 lbs
Retail Price: $79.33
Our Price: $41.65

Options
 
Quantity

Add to cart
        


 

Send to friend
Your name: *
Your e-mail: *
Recipient's email: *

Type the characters you see in the picture. (If you do not see any picture here, please enable images in your web browser options and refresh this page):

Get a different code
The code is case-sensitive and must be entered exactly as above.

Send to friend
 

Detailed images
UGL 28213 DRYLOK SLATE GRAY EPOXY E1 FLOOR PAINT 221 VOC SIZE:1 GALLON.
 

Recommended products list
Customers who bought this product also bought the following products:  

 
 

Your cart Your cart
Cart is empty
 

View cart
Checkout
Orders history


Authentication Authentication
Username

Password

Log in 
Register 
Recover password

If Javascript is disabled in your browser click here


News News


 


Popular Categories

Tapes

Spray Paint

Paint Brushes

Paint Tools

Caulk and Sealants

Paint Remover & Stripper

Hand Tools

Interior Paint

Exterior Paint

 

Popular Brands

ZAR

Valpar

Cabot

DAP

3M

ASM

 

Hammerite

Modern Masters

 

Best Seller Products

Duct Tape

Black Paint

White Paint

Blue Paint

Red Paint

Dap Plus

Chalk Board Paint

Gold Paint

Aluminum Paint

 
 

We accept major credit cards

credit cards logo
 
Home | Store | About Us | Search | Terms & Conditions | Privacy Statement | Contact Us | Directory | Site Map | News | Paint Store Blog
 
SEO by site SEO
 
 

CONNECT WITH US
Copyright 2005-2015 Paint Store - All Rights Reserved